JD  check valves are ideally suitable for vertical and horizontal application. A range of Check Valves (Non-Return Valves) suitable for oil, gas, water, refining, power and chemical applications where the prevention of flow reversal is mandatory.


DESIGN –JD Wafer Type Check Valve has short face-to-face dimensions and low weight allows a simple space saving installation between the companion flanges. The valves are suitable to mounting between weld neck or slip on type companion flanges of different standards.They are specially developed for applications where a low-pressure loss is essential.

OPERATING PRINCIPLE-Opening and closing of the valve will take place at an extremely low-pressure difference over the valve disc. The eccentric disc shaft combination with the disc seat guarantees a positive shut off returning media. Wafer check valves are becoming the preferred type of check valve for most applications, due to their compact design and relatively low cost.

Wafer Type Check Valves (Non Return Valve)
Single Plate Body Design,
Suitable to mount between two flanges.
Design Standard: API 6D
Size Range : 1″ to 42″
Pressure Rating : 150# / 300# / PN 10 / PN 16 / PN 25

Material of Construction:

Cast Iron                         : IS 210 Gr FG 200

Cast Carbon Steel           : ASTM A 216 Gr WCB

Cast Stainless Steel        : ASTM A 351 Gr CF 8/CF 8M

Seat                                     : Nitrile, Neoprene, PTFE

End                                    : Wafer Type

Pressure Rating               : ASA 125#, 150#

Size Range                        : 50 mm to 300 mm

Design & Testing International Standard:

Valve Design                    : API 6D

Pressure Testing             : API 598

Face To Face                     : ANSI B 16.10

Mounting Between          : ANSI B 16.5 / BS 10 Table / DIN / IS 6392