Single / Two / Three Piece Design, Full Bore / Regular (Reduce) Bore
Two Way Floating / Trunnion Mounted Ball Valves

J D Controls mfg. High performance Ball Valve as per international design and standard to get 100% Client Satisfaction and repeat order with total interchangeability, superior quality, workmanship & service. These Ball Valves come in Single Piece (1/2 to 4) / Two Piece (1 to 8) as well as in Three Piece Design (1/2 to 12) to suit various critical, non-critical applications and pressure rating up to 1500 class in both full bore & regular (reduce) bore design.

J D P.T.F.E. seated Ball Valves gives Zero Leakage, Tight Shut-Off and Low Torque with easy smooth operation at temperature ranging from -20° C. to +220° C. Electro-Polished, Buff Finish & Ultra clean valve also provided for Food & Pharmaceutical Industries on request.

Single Piece Design Screwed End Ball Valve (Full Bore)

Single Piece Design Screwed End Ball Valve (Full Bore)

Three Piece Design Screwed End Ball Valve (Full Bore)

Three Piece Design Screwed End Ball Valve (Full Bore)

Single Piece Design Flanged End Ball Valve (Reduce / Full Bore)

Single Piece Design Flanged End Ball Valve (Reduce / Full Bore)

Two Piece Design Flanged End Ball Valve (Full Bore)

Two Piece Design Flanged End Ball Valve (Full Bore)

Three Piece Design Flanged End Ball Valve (Reduce / Full Bore)

Three Piece Design Flanged End Ball Valve (Reduce / Full Bore)

Three Piece Design Universal (Capsule) Hole Design Ball Valve (Full Bore)

Three Piece Design Universal (Capsule) Hole Design Ball Valve (Full Bore)

Extended Pipe Nipple End Ball Valve

Extended Pipe Nipple End Ball Valve

Ball Control Valve

Ball Control Valve

Fire Safe Design : Floating / Trunnion Mounted:
J D Controls mfg. both Floating & Trunnion Mounted Ball Valves. In the floating ball design, where sealing takes place by allowing the Ball under pressure to move towards the downstream seat to effect tight seal. For higher sizes and pressure ratings Trunnion mounted ball valves are preferred by industry.

Fire Safe Design Design Ball Valve

Valve Operation:

J D Ball Valves are generally supplied with manual hand lever or gear unit operated, depending on valve size. J D also offering Ball Valves with either Pneumatic or Electrical actuator operated for automation.

Wide Range of Body Seat, Seal & Packing:

J D Ball Valves are generally supplied with manual hand lever or gear unit operated, depending on valve size. J D also offering Ball Valves with either Pneumatic or Electrical actuator operated for automation.

Salient Features:

  • High Performance Ball Valve
  • Longer Life
  • Positive Shut off
  • Quick in Action
  • No Lubrication
  • Compact Design
  • Low Pressure Drop
  • Visual Open / Close Indication Simplicity

Special Options:

  • Extended Bonnet Type
  • Partial / Full Jacketed Ball Valve
  • Handle Locking Arrangement
  • P.T.F.E. (PFA / FEP) Lined Ball Valve
  • Flush Bottom Design Ball Valve
  • Multiport Ball Valve (Three Way / Four Way)
  • Polypropylene Material Ball Valve
  • Tri-Clover End Ball Valve
  • Pneumatic Rotary Actuator Operated Ball Valve
  • Tailor Made Ball Valve

Material of Construction:

Cast Iron                                : IS 210 Gr FG 200
Cast Carbon Steel               : ASTM A 216 Gr WCB
Cast Stainless Steel            : ASTM A 351 Gr CF 8/CF 8M
Seat, M. O. C. Of Seat         : Nitrile, Neoprene, EPDM, Hyplon, PTFE
End Connection                  : Screwed AS PER BSP/BSPT/NPT
Socketweld                           : AS PER ANSI B 16.11
Flanged                                  : AS PER ANSI B 16.5
Pressure Rating                   : ASA 125#, 150#, 800#
Engineering Option             : Gear Operated, Electrical Actuated, Pneumatic Actuated
Size Range                           : 6 mm to 150 mm

Design & Testing International Standard:

Valve Design             : BS 5351 / ANSI B 16.34 / API 6D
Pressure Testing      : BS 6755 Part II / API 598 / API 6D
Fire Safe Testing     : BS 6755 Part II API 607 / API 6FA /
Face To Face            : ANSI B 16.10
Flange Drilling         : ANSI B 16.5 / BS 10 Table / DIN / IS 6392
Butt Weld End          : ANSI B 16.25
Socket Weld End     : ANSI B 16.11
Screwed End            : ANSI B 1.20.1(BSP/NPT)