Jacketed Ball Valves :-

Single Piece Design
Regular (Reduce) Bore Fully Jacketed Ball Valve
Flanged End Connection
Hand Lever / Gear / Pneumatic Operation

J. D. Controls offers a range of Fully Jacketed Ball Valves. The jacket covers the body from one flange to the other flange. The body is modified by adding oversize flanges. As example: 2″ x 3″ Jacketed Ball Valve has the nominal bore of 2″ (DN 50) and the flange size is 3″(DN 80). It allows enough space for bolting clearance.

J. D. Controls offers a range of Fully Jacketed Ball Valves. The jacket covers the body from one flange to the other flange. The body is modified by adding oversize flanges. As example: 2″ x 3″ Jacketed Ball Valve has the nominal bore of 2″ (DN 50) and the flange size is 3″(DN 80). It allows enough space for bolting clearance.

The Jackets assure consistent valve Heating or Cooling of the process media to prevent crystallization or seizing of flow media. The Jacketed Ball Valve (Heating Jacket Ball Valve) with very well design to help the high temperature steam or oil flow over the valve ball & body parts to keep the media liquid. This applies especially to media like bitumen and liquid sulfur. In addition, the efficient flow of media is ensured through the elimination of pockets.

VALVE OPERATION:

J D Ball Valves are generally supplied with manual hand lever or gear unit operated, depending on valve size. J D also offering Ball Valves with either Pneumatic or Electrical actuator operated for automation.

Jacketed Ball Valve (Full Jacketed Ball Valve)

Jacketed Ball Valve (Full Jacketed Ball Valve)

Half Jacketed Ball Valve

Half Jacketed Ball Valve

Three Way Jacketed Ball Valve

Three Way Jacketed Ball Valve

Generally standard Jacketed Ball Valves are delivered in carbon steel and different types of stainless steel materials. Other special materials are available upon special request.

J. D. Jacketed P.T.F.E. seated Ball Valves gives Zero Leakage, Tight Shut-Off and Low Torque with easy smooth operation at temperature ranging from -20° C. to +220° C. Electro-Polished, Buff Finish & Ultra clean valve also provided for Food & Pharmaceutical Industries on request.

WIDE RANGE OF BODY SEAT, SEAL & PACKING

J D Ball Valves are also available with different type of Seat, Seal & Packing material such as P.T.F.E. (Virgin) / Glass Filled P.T.F.E. / Carbon Filled P.T.F.E. / Graphite (Grafoil) / PEEK to suit special requirement of client.

Salient Features: 

  • High Performance Ball Valve
  • Longer Life
  • Positive Shut off
  • Quick in Action
  • No Lubrication
  • Compact Design
  • Low Pressure Drop
  • Simplicity
  • Heating / Cooling Jackets
  • Wide selection of Different Jacket Material

Design & Testing International Standard: 

Valve Design                                    : BS 5351 / ANSI B 16.34 / API 6D

Pressure Testing                              : BS 6755 Part II / API 598 / API 6D

Face to Face                                     : As Per ANSI B 16.10

Flange Drilling                                 : ANSI B 16.5 / BS 10 Table / DIN / IS 6392

Size Range                                       : ½” x 1” To 6” x 8”

Material of Construction: 

Body / Insert

  • Cast Carbon Steel to ASTM A 216 GR. WCB
  •  Stainless Steel to ASTM A 351 GR. CF 8 / 8M / 3 / 3M

Ball

  • Stainless Steel to ASTM A 351 GR. CF 8 / 8M / 3 / 3M
  •  Hast Alloy B / C
  •  ASTM A 351 GR. CN 7M (Alloy 20)

Stem

  • AISI 410 (S.S. 410 – 13% Cr. Steel)
  •  AISI 304 (S.S. 304)
  •  AISI 316 (S.S. 316)
  •  AISI 304L (S.S. 304L)
  • AISI 316L (S.S. 316L)
  •  Hast Alloy B / C
  •  Alloy 20

Ball Seat / Gland Seal / Stem Seal

  • P.T.F.E. – Virgin
  •  P.T.F.E. – Glass Filled
  •  P.T.F.E. – Carbon Filled
  •  Grafoil

Jacket Material

  • M.S.
  • S.S. 304
  • S.S 316
  • S.S 304L
  • S.S 316L