Purpose:-

JD Multiport Ball Valves are ideally used for flow diverting or mixing application. There can be one inlet & multiple outlets & vice versa

JD Controls Four Way Ball Valves is a fluid control valve.

Types

1] L Port

2] T port

3 ] “LL” [X] Port. it has four ports equally spaced round the valve chamber and the ball has two passages to connect the adjacent ports.It has two flow positions as shown, and usually a central position where all ports are closed.

Application of 4 Way Ball Valve:-

  • Air Dryers
  • CO2 Dryers
  • LPG Compress

Advantages

  • Multiple no of valves can be replaced by few no of valves.
  • Reduced Labour& Maintenance cost
  • Space saving
  • Flow diversion or Mixing can be more precise.

 

Availability

  • Size : – DN25/25mm/One Inch1” To DN300/300mm/ Twenty Four Inch 12”
  • MC : – WCB/CF8(SS304)/CF8M(SS316)/CF3(304L)/CF3M(316L)
  • Pre class: – 150# / 300# / 600# / 900#
  • Operation: – Manual/Pneumatic/Electrical
  • End connection: – Flanged End & Screwed End
  • Valve Design:- BS5351/ANSI B 16.34/ API 6D
  • Pressure Testing:- BS 6755 Part II/API 598/API 6D
  • Fire Safe Testing:- BS 6755 Part II API 607/ API 6FA

Ends:- S/E(Screwed End)[BSP/NPT-F],SW & F/E(Flanged End)

Salient Features: 

  • High Performance Ball Valve
  • Longer Life
  • Positive Shut off
  • Quick in Action
  • No Lubrication
  • Compact Design
  • Low Pressure Drop
  • Simplicity

Design & Testing International Standard: 

Valve Design                                    : BS 5351 / ANSI B 16.34 / API 6D
Pressure Testing                              : BS 6755 Part II / API 598 / API 6D
Fire Safe Testing                             : BS 6755 Part II API 607 / API 6FA /
Face To Face                                    : ANSI B 16.10
Flange Drilling                                 : ANSI B 16.5 / BS 10 Table / DIN / IS 6392
Butt Weld End                                  : ANSI B 16.25
Socket Weld End                             : ANSI B 16.11
Screwed End                                    : ANSI B 1.20.1(BSP/NPT)

Material of Construction:

Body / End Connector Piece:
Cast Iron to ASTM A 126 Class B IS 210 GR. FG 200 / 220 / 260
Ductile Iron to ASTM A 536 Grade 65-45-12
Cast Carbon Steel to ASTM A 216 GR. WCB
Stainless Steel to ASTM A 351 GR. CF 8 / 8M / 3 / 3M
Hast Alloy B / C
ASTM A 351 GR. CN 7M (Alloy 20)

 Ball:
Stainless Steel to ASTM A 351 GR. CF 8 / 8M / 3 / 3M
Hast Alloy B / C
ASTM A 351 GR. CN 7M (Alloy 20)

Stem:

AISI 410 (S.S. 410 13% Cr. Steel)
AISI 304 (S.S. 304)
AISI 316 (S.S. 316)
AISI 304L (S.S. 304L)
AISI 316L (S.S. 316L)
Hast Alloy B / C
Alloy 20

Ball Seat / Gland Seal / Stem Seal

P.T.F.E. Virgin
P.T.F.E. Glass Filled
P.T.F.E. Carbon Filled
Grafoil